Brochures and Data Sheets

4200-062 8 Revision 2.01
3. MPM-100 Configurations
ThissectionisanoverviewoftheMPM‐100monitorconfigurations.
3.1. MPM Model Number Description
TheMPMcanaccommodateupto30differentbatteryconfigurations,whichmaybemodified
fornonstandardbatteryconfigurations.(Forexample,a1x60configurationcanhave59cells.)

TheMPM‐100modelnumbersarestructuredasfollows.

1001‐nnnAxxxxxx

MPMmodel.

Groupofletters/numbersthatindicatesthe
followingoptions:


Position1(Xxxxxx):Power
A=UnitispoweredbyACwallplug.(Availableonlyon120Vunits.)
D=UnitispoweredbytheDCbus. 

Position2(xXxxxx):Communicationoptions(fiberoptic,EthernetorRS‐232).Referto
CommunicationOptionsinthismanualfordetails.

Position3(xxXxxx):Methodofsensingdischargecurrent.
C=Currenttransducer.
S=Shunt.

Position4(xxxXxx):Floatcurrenttransducer.
[blank]=Nofloatcurrenttransducer.
F=Floatcurrenttransducer.

Position5(xxxxXx):Mainpowerlinefrequency.
5=50Hz.
6=60Hz.

Position6(xxxxxX):Brandlabeling.
A=Albér.
S=OEMmodel.

Warning:checktheconfigurationonMPM‐100beforeinstallation.Makesurethatdrawingsare
recheckedforconfigurationinformation.Ifthewrongconfigurationisinstalledontothebattery,
theunitcouldbe permanentlydamaged.
