User Guide

Commissioning Assistant
29-1
29. Commissioning Assistant
View|Reports|Commissioning Report
The Commissioning Assistant creates a report that is extremely helpful if technical support must
be provided for your system. Similar to a setup wizard, the assistant helps you commission a
string by instructing you to perform certain functions and record the results. You may also use the
assistant to exchange equipment and recommission the string. Some assistant screens appear only
if certain equipment or options are selected.
NOTE: Each commissioning assistant screen has complete instructions at the top of the screen.
The instructions in this chapter are only meant to supplement the instructions on the screens. Be
certain to follow the instructions on each screen.
After completing the commissioning assistant, send the saved report with a file name .CMS
extension as an email attachment. Emailing the report to [e-mail] is mandatory, as the
report is an integral part of the product warranty.
29.1. Starting the Assistant for a New String
Connecting to a string for the first time opens the commissioning assistant Welcome screen.
Figure 135. Commissioning Assistant Welcome
To commission the string, click OK on the Welcome screen to display the MPM or BDS
Monitor Pre-Power Check List. If you click Cancel, the Welcome screen displays until you
acknowledge the Pre-Power Check List or you click the Existing System Ignore button.