User Guide

Programming Battery Setup for the BDS
18-20
18.9. Battery Setup: LGS (BDS)
String View > Setup|Battery|LGS
Leibert Global Services (LGS) offers a service in which its Customer Response Center (CRC)
remotely monitors your Alber BDS or MPM equipment and other facility devices around the
clock. The CRC evaluates alarms and provides immediate telephone and e-mail assistance
using a customer-defined response and escalation plan. For details about subscribing to the
service, phone [phone] or (800) SITEMON or e-mail [e-mail].
If you have subscribed to an LGS monitoring plan, complete the Battery Setup|LGS dialog
box as follows.
Figure 72. Battery Setup - LGS (BDS)
System Type - Type three characters to identify the device being monitored.
For MPM-100, type MPM; for BDS-256, type 256; for BDS-40, type 040.
Site ID - Type the five character ID for customer site identification.
Monitor Device Number - Type the seven digit number used for customer device tracking.
LGS Phone Number - Type the telephone number that connects to the LGS remote
monitoring service. This number is used for a daily communication test and alarm reporting.
LGS Report Time - Type the time the monitor calls in each day to confirm communication.
Use the 24 hour clock; e.g., 13:45.
Enabled - Check this box to enable remote monitoring by LGS. Monitoring is enabled only
after a monitoring plan has been purchased from LGS.