User Guide

Synchronizing Using Check Settings
17-3
17.1. Connecting With a Service Computer
This section describes how to connect to a monitor when site details are not known.
Connecting a Service Computer via Modem - Using a Service computer, type the site
telephone number and MUX ID (if a multiplexer is used) under Setup|System|Link. If using a
BDS, also type the String ID number and the BDS monitor configuration under
Setup|System|String. Click Connection. Check Settings|General appears. Click Upload to
synchronize settings between the monitor and Service computer database, then click Close.
String View displays all real time data.
Connecting a Service Computer via Network - Using a Service computer, type an IP
address under Setup|System|Link. If using a BDS, also type the String ID number and the
BDS monitor configuration under Setup|System|String. Click Connection.
Check Settings|General appears. Click Upload to synchronize settings between the monitor
and Service computer database, then click Close. String View displays all real time data.
Connecting a Service Computer via RS-232 - Using a Service computer, click Connection.
Check Settings|General appears. Click Upload to synchronize settings between the monitor
and Service computer database, then click Close. String View displays all real time data.