User Guide

Setting Up a New MPM or BDS System
16-3
CAUTION: Clicking the Delete button deletes all information for the displayed customer. All
locations, batteries, and strings set up for the customer will be lost.
Customer Name (required) - To add new customer details, click New and type the customer
name. If monitoring only one customer, you may identify a region, division, etc. Complete
the Customer Address details.
Note You cannot have two identical customer names. Selecting different customers changes
the available locations on the Location dialog box.
Customer Contact - Type the name and contact information of the person at the customer
location responsible for the battery system. This name may be used for reports faxed using
Setup|System|Reporting.
Workstation - To assign this customer to a workstation, select a workstation from the
drop-down list. By doing this, only the assigned workstation sees the customer and battery
strings. If a workstation name is not assigned, any computer not assigned as a workstation can
view this customer name.
Clear - To deselect the workstation assigned to this customer, click the Clear button. This
does not delete the name from the Workstation drop-down list.
When finished, click Save to save to the database or click the Location tab to continue setup.
16.4. System Setup: Location
String Status > Setup|System|Location
Before completing the Location dialog box, confirm the correct customer is selected on the
Customer box.
Figure 43. System Setup - Location
CAUTION: Clicking the Delete button deletes all information for the displayed location. All
batteries and strings set up for the location will be lost.