User Guide

Practical Theory: Understanding System Installation
10-4
 If the Service computer is a remote connection (off-site) computer for viewing battery
data via telephone line, and a copy of the Central computer database is available:
To set up the system . . . If you need more help, refer to
1. Install the Data Manager as a Service computer. Installing the Data Manager (BMDM) Software.
2. Copy the database from the Central computer to the
Service computer.
Data Manager Database for file names.
3. Set communication parameters. Communication Port Settings.
4. Connect the computer modem to the telephone line.
5. Establish communication via the site selected from
the String Status.
Connecting via a Modem.
To view battery data, refer to Viewing Battery and Monitor Status.
 If the Service computer is a remote connection (off-site) computer for viewing battery
data via telephone line, and a copy of the central database is not available:
To set up the system . . . If you need more help, refer to
1. Install the Data Manager as a Service computer. Installing the Data Manager (BMDM) Software.
3. Set communication parameters. Communication Port Settings.
2. Connect the computer modem to the telephone line.
4. Set the telephone number and the MUX ID number if
required. (MPM only)
Setting Up a New MPM or BDS System.
5. Set the telephone number, the MUX ID number if
required, the string number and the configuration to
the BDS. (BDS only)
Setting Up a New MPM or BDS System.
6. Establish communication via the Service location. Connecting via a Modem
7. Synchronize the monitor to the computer. Synchronizing Using the Check Settings
To view battery data, refer to Viewing Battery and Monitor Status.