User Guide

User Specific Settings
7-3
Calibration - Allows use of Setup|Calibration on String View to calibrate hardware.
Diagnostics - Allows use of Diagnostics on String View to check hardware and firmware
status.
Check Settings Upload - Allows uploading of hardware settings using the Upload button on
the Setup|Check Settings dialog box.
Data Extraction - Allow connection to a monitor to copy or copy then remove data from the
monitor. Copy then remove depends on computer type.
Delete Data Sets - Allows data sets to be selected then deleted.
Run Resistance Test - Allows the manual running of a resistance test, under Diagnostics on
the String View screen, to bring readings into the database from the hardware.
All or None - Alternate action buttons that select or deselect all check boxes except
Administrator Rights.
String Access area: All or Select or Edit - On the Edit User dialog box, click All to give the
user rights to all strings. Click Select to give rights to particular strings. After clicking Select,
click Edit to display the String Access Form, where you may select the strings the user can
view.
Figure 34. String Access Form
After selecting strings on the String Access Form, click Save to return to the Edit User box.
Save or Cancel - After completing the Edit User box, to save the selections and add the name
or changes to the User Access Rights list, click Save. To exit without making any changes,
click Cancel.
Delete - On the User Access Rights box, to delete a user, click on the user name to highlight
it, then click the Delete button. At the confirmation box, click Yes.