User Guide

Error Codes
32-2
CODE MESSAGE SITUATION
203 The currently selected COM Port, COM
<ComPortNum>, is already in use by another
program. Press OK and choose a different port.
When initializing COM port
204 The currently selected Com Port, Com
<ComPortNum>, is not available. Press OK and
choose a different port.
When initializing COM port
205 No response from Modem/Cable Multiplexer. When connecting
modem/cable multiplexer
206 Comm Error: No response for sending "Stop Scan"
command 3 times.
207 Comm Error: No response for sending "Start Scan"
command 3 times.
208 Comm Error: No response for sending "Load Off"
command 3 times.
209 Comm Error: No response for sending "Send DCM #"
command 3 times.
300 Upgrade failed: No response for sending code 3 times. When sending frames
301 Upgrade failed: Not responding. Check firmware location
(PROM or flush memory) in
the beginning of firmware
upgrade
302 Upgrade failed: Code confirm failed.
400 Resistance test failed: 60 minute time-out. Manual R-test is not
completed in 60 minutes
401 Data format error. The data may be saved for a
different MPM configuration.
When reading resistance or
historical data
402 The raw count equals 0. Please check hardware. During calibration
403 Data import error (Encode date/time). Please try
again.
When importing alarm data
404 Wrong overall voltage data. Got invalid overall voltage in
discharge data
405 Subset <SubsetNum> does not have an initial value. When viewing discharge
curves, found invalid subset
406 Subset <SubsetNum> does not have a final value. When viewing discharge
curves, found invalid subset
407 Discharge data cannot be shown due to invalid
Date/Time.
500 Subset 3 is selected, but Subset 2 is not selected. If
you want to show two curves, the second curve
should be in Subset 2.
Wrong selection in Curve
Option of Discharge View
screen
501 Two password entries are not identical. Please enter
again.
502 Password must have five characters.
1000 The string name exists. It must be unique.
1001 The battery name exists. It must be unique.
1002 The location name exists. It must be unique.
1003 The customer name exists. It must be unique.