User Guide

Commissioning Assistant
31-7
31.4.5. Check Settings Screen
Figure 161. Check Settings (Comm Asst)
Click the Check Settings button. Confirm the values, then click Yes to upload the
calibration constants from the monitor to the database. If you click Recheck, the screen
refreshes. Note Only the calibration constants are uploaded.
31.4.6. Serial Numbers Screen
Figure 162. Serial Numbers (Comm Asst)
Click the Serial Numbers button. To upload the serial numbers and firmware revisions
from the connected hardware, click the Upload button. If the data is incorrect, click in the
field to type the correct data and click the Change button to send the data to the hardware.
The RTM and ELM serial numbers must be typed in manually.