User Guide

Upgrades
30-1
30. Upgrades
String View > Setup|Upgrade Firmware or Upgrade DCM Firmware
E
2
(electrically erasable) memory on the MPM and SRAM memory on the BDS Controller store
calibration, setup information, and actual test data. On both units, flash memory is for uploads of
firmware, which can be upgraded on-site or remotely via modem. Refer to the MPM or BDS
Diagnostics-Memory section for a complete description.
The latest upgrades and upgrade instructions are on the Web at www.alber.com.
Note On the BDS, the Setup|Upgrade Firmware item is enabled only when the BDS Controller is
connected to String 1.
Figure 152. Setup Menu Showing Upgrade Options (BDS)