User Guide

Using the Report Generator
24-13
Threshold Deviation area - Select Include to include the threshold deviation report. Select
Start New Page to insert a page break before the report. Select Show Percent or Show
Value to have deviations shown as percent change or actual values. Only cells that exceed
threshold values are listed.
Maintenance Recommendation area - Select Include to include the maintenance
recommendation report. Select Start New Page to insert a page break before the report.
Select Include Probable Cause Notes and Include Corrective Action Notes to include text
that attempts to resolve the types of violations found, such as high resistance. Only cells with
violations are listed.
Status Parameters area - Select Overall Voltage, Cell Voltage, Cell Resistance, IT
(Intertier) Resistance or Temperature to list these items in Parameter Status as of Last
Reading. You must also select the Include Status Parameters check box.
Select Include Detail Overall Voltage, Include Detail Cell Voltage, Include Detail Cell
Resistance, Include Detail IT Resistance or Include Detail Temperature to print these
sections, which have graphs of each item in violation. Items with Normal status do not print.
Discharge Setup area - Select the Include Discharge Report check box to print a discharge
report. To add a discharge duration time to the list, Click New then type a new time in the
highlighted 00:00:00 in the Discharge Time list. To sort the times, click Sort. To remove a
time from the Discharge Time list, click the time to highlight it, then click Delete.
For a description of the items in Discharges in the report, refer to Using the Web Report
Generator.