User Guide

Viewing Battery and Monitor Status
21-12
Figure 85. Trend Menu
On the pop-up menu, click Trend then Cell or Average to display the trend analysis graph. If the
trend analysis box has active Previous/Next Parameter arrows, you may click them to view other
cells. All trend analysis screens have a Print button.
Figure 86. Trend - Cell Voltage (Typical of all Trend screens)
To use the Graph Scale Control to vary the y-axis scale on the graph, click the Graph Scale Control
Enabled check box. This keeps the y-axis the same when viewing other cells. To determine a data
point numerical value (in volts or ohms) and date and time for an event on the graph, click a dot on
the graph. The value appears on the upper left. Right click a graph to change display features, such as
font size, shadows, numeric precision or grid. The Average check box averages the readings.
21.12. Alarm Data
String View > View alarm or View|Alarm
The MPM or BDS monitor constantly checks threshold values set under Battery Setup. As long as
alarms are enabled, the monitor creates a record of thresholds violated. Click View Alarm to display
alarm screens.