Instruction manual

Instruction Manual
D500240X012
A31A Valve
October 2012
24
Figure 8. Fisher A31A NPS 3 through 12 Typical Assembly
A5947
27291
27301
C0821
NPS3THROUGH8CL150ANDNPS3THROUGH6CL300
(WAFER STYLE SHOWN)
NPS 8 THROUGH 12 CL300
NPS 10 AND 12 CL150
NPS 3 THROUGH 8 CL150
NPS 3 THROUGH 6 CL300
NPS 12 CL300
NPS 8 & 10 CL300
NPS 10 & 12 CL150
SEE VIEW A
WELD LOCATION
WELD
LOCATION
TAPER KEY
SHAFT
DISK
MINIMUM TAPER KEY ENGAGEMENT
MAXIMUM TAPERKEYENGAGEMENT
VIEW A
TAPER KEY WELD LOCATION
Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they arenot
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
E 1998, 2012 Fisher Controls International LLC. All rights reserved.
Fisher, POSI-SEAL, and ENVIRO-SEAL are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co.
Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property
of their respective owners.
Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.