Data Sheet

Bulletin 71.1:67D
11
Ordering Guide
Type (Select One)
67D (aluminum without internal relief)***
67DR (aluminum with internal relief)***
67DS (stainless steel without
internal relief)***
67DSR (stainless steel with internal relief)***
67DF (aluminum with lter and without
internal relief)***
67DFR (aluminum with lter and
internal relief)***
67DFS (stainless steel with lter and without
internal relief)***
67DFSR (stainless steel with lter and
internal relief)***
Quantity (Specify)
Spring Case Style (Select One)
Drilled hole vent (Types 67D, 67DR, 67DF, and
67DFR standard)***
1/4 NPT vent (Types 67DS, 67DSR, 67DFS,
and 67DFSR standard)***
Single hole panel mount***
Adjusting Screw (Select One)
Square head (Types 67D, 67DR, 67DF,
67DFR standard)***
Square head with closing cap (Types 67DS,
67DSR, 67DFS, and 67DFSR standard)***
Handwheel***
Outlet Pressure Range (Select One)
0 to 20 psig / 0 to 1.4 bar***
0 to 35 psig / 0 to 2.4 bar***
0 to 60 psig / 0 to 4.1 bar***
0 to 125 psig / 0 to 8.6 bar***
0 to 150 psig / 0 to 10.3 bar (Types 67DS, 67DSR,
67DFS, and 67DFSR only)***
Diaphragm, O-Rings, and Valve Seat Plug (Select One)
Nitrile (NBR) (standard)***
Fluorocarbon (FKM)**
Silicone (VMQ) diaphragm, Low Temperature
Nitrile (NBR) O-rings, and Nitrile (NBR) valve seat*
Filter Material (Select One)
Polyethylene (5 microns) (standard)***
Glass (5 microns)***
Polyvinylidene (PVDF) (40 microns)***
Stainless steel (40 microns)***
Drain Valve (Select One)
Brass (Types 67DF and 67DFR standard)***
Stainless steel (Types 67DFS and
67DFSR standard)***
Automatic Drain with Nitrile (NBR) elastomers***
Automatic Drain with Fluorocarbon (FKM) elastomers**
Spring Case Vent Location (Select One)
Position 1 - Aligned with inlet (standard)***
Position 2
Position 3
Position 4
External Fixed Bleed for Type 67DR, 67DSR, 67DFR, or
67DFSR (Optional)
Yes**
Smart Bleed™ Internal Check Valve Airset
(Optional - Types 67DFR and 67DFSR only)
Yes**
Second Outlet (Select One)
Open (Types 67D, 67DR, 67DF, and
67DFR standard)***
Plugged with pipe plug (Types 67DS, 67DSR,
67DFS, and 67DFSR standard)***
Pressure Gauge (see below)
Triple Scale Pressure Gauge (Optional)
Brass Gauge or Stainless Steel Gauge
0 to 30 psig / 0 to 0.2 MPa / 0 to 2.1 bar***
0 to 60 psig / 0 to 0.4 MPa / 0 to 4.1 bar***
0 to 160 psig / 0 to 1.1 MPa / 0 to 11.0 bar***
TYPES
DIMENSIONS
A B C D E F G H I
Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm
67DF and 67DFR 5.93 151 3.66 93
4.54 115 2.98 76 1.49 38 2.88 73 0.63 16 0.69 18 2.25 57
67DFS and 67DFSR 6.27 159 5.12 130
- continued -