Data Sheet

Bulletin 71.1:67C
11
Ordering Guide
Type (Select One)
67C (Aluminum without internal relief)***
67CR (Aluminum with internal relief)***
67CS (Stainless steel without internal relief)***
67CSR (Stainless steel with internal relief)***
67CF(Aluminumwithlterandwithoutinternalrelief)***
67CFR(Aluminumwithlterandinternalrelief)***
67CFS(Stainlesssteelwithlterandwithoutinternalrelief)***
67CFSR(Stainlesssteelwithlterandinternalrelief)***
Quantity (Specify) ____________
Spring Case Style (Select One)
Drilled hole vent (Types 67C, 67CR, 67CF, and
67CFR standard)***
1/4 NPT vent (Types 67CS, 67CSR, 67CFS, and
67CFSR standard)***
Single hole panel mount***
3-hole panel mount (Types 67C, 67CR, 67CF, and
67CFR only)***
Adjusting Screw (Select One)
Square head (Types 67C, 67CR, 67CF, and 67CFR
standard)***
Square head with closing cap (Types 67CS, 67CSR,
67CFS, and 67CFSR standard)***
Handwheel***
Outlet Pressure Range (Select One)
0 to 20 psig / 0 to 1.4 bar***
0 to 35 psig / 0 to 2.4 bar***
0 to 60 psig / 0 to 4.1 bar***
0 to 125 psig / 0 to 8.6 bar***
0 to 150 psig / 0 to 10.3 bar (Types 67CS, 67CSR,
67CFS, and 67CFSR only)***
Diaphragm, O-Rings, and Valve Plug (Select One)
Nitrile (NBR) (standard)***
Fluorocarbon(FKM)**
Silicone (VMQ) diaphragm, O-rings, and Nitrile (NBR)
valve plug*
Filter Material (Select One)
Polyethylene (5 microns) (standard)***
Glass (5 microns)***
PVDF (Plastic) (40 microns)***
Stainless steel (40 microns)***
Dripwell
Standard
Large capacity with manual drain valve
Large capacity with automatic drain valve, Nitrile (NBR)
Large capacity with automatic drain valve,
Fluorocarbon(FKM)
Drain Valve (for Manual Drain Only) (Select One)
Brass (Types 67CF and 67CFR standard)***
Stainless steel (Types 67CFS and 67CFSR standard)***
Drain Valve Location (for Standard Dripwell Only)
(Select One)
Position 1 - Aligned with inlet (standard)***
Position 2
Position 3
Position 4
Spring Case Vent Location (Select One)
Position 1 - Aligned with inlet (standard)***
Position 2
Position 3
Position 4
Fixed Bleed for Type 67CR, 67CSR, 67CFR, or 67CFSR
(Optional)
Yes**
GE03268
INCHES /
mm
Figure 9. Types 67CFS and 67CFSR Dimensions (continued)
DIMENSIONS FOR PANEL MOUNT OPTION WITH HANDWHEELDIMENSIONS WITHOUT CLOSING CAP
PANEL
0.12 TO 0.25 /
3.0 TO 6.4
2.37 / 60
MAXIMUM
5.00 /
127
MAXIMUM
2.65 /
67
4.13 /
105
MAXIMUM