Data Sheet

Bulletin LP-7:67C
2
Specications
Maximum Allowable Inlet Pressure
250 psig (17,2 bar)
Maximum Emergency Outlet Pressure
50 psig (3,4 bar) above outlet pressure setting
Temperature Capabilities
-40° to 180°F (-40° to 82°C)
Outlet Pressure Range
See Table 1
Body Size and End Connection Style
1/4-inch FNPT
Spring Case Vent Location
Aligned over inlet
Options
• Wrench Adjustment
• Handwheel Adjustment
• Dial Cap Adjustment
• Tamper-Resistant, Non-Adjustable Spring Case
• Outlet Pressure Gauge
Table 1. Regulator Specication and Ordering Information
OUTLET PRESSURE
SETTING, PSIG (bar)
SPRING RANGE,
PSIG (bar)
INLET AND OUTLET
CONNECTIONS
CAPACITY IN BTU/HR
OF PROPANE
(1)
ADJUSTMENT STYLE
AND TYPE NUMBER
- - - - - - - -
1/4-inch FNPT
- - - - Wrench Handwheel
15 (1,0) 3 to 20 (0,21 to 1,4) 675 000 67CW-683 67CH-751
20 (1,4) 3 to 35 (0,21 to 2,4) 750 000 67CW-684 67CH-743
40 (2,8) 30 to 60 (2,1 to 4,1) 1 200 000 67CW-685 67CH-742
50 (3,4) 50 to 135 (3,4 to 9,3) 1 000 000 67CW-701 67CH-741
- - - - - - - - - - - - Dial Cap
15 (1,0) 5 to 20 (0,34 to 1,4) 675 000 67CD-100
40 (2,8) 20 to 50 (1,4 to 3,4) 1 200 000 67CD-102
50 (3,4) 40 to 100 (2,8 to 6,9) 1 000 000 67CD-103
- - - - - - - - - - - - Non-Adjustable
10 (0,69)
Non-Adjustable
400 000 67CN-106
15 (1,0) 600 000 67CN-104
20 (1,4) 750 000 67CN-105
1. Based on inlet pressure 20 psig (1,4 bar) greater than outlet with 20% droop. Liquid capacity equals 3 to 5 GPH (11,4 to 18,9 l/h).