Data Sheet

Bulletin 62.3:670
7
Installation
Dimensions for installation clearances are shown in
Figure 6.
Ordering Information
When ordering, complete the ordering guide on this
page. Refer to the Specications section on page 2.
Review the description to the right of each specication
and the information in each referenced table or gure.
Specify your choice whenever a selection is offered.
Ordering Guide
Type (See Table 1 for Construction details)
(Select One)
670
670F
670FG
670FGV
670G
670GV
671
674G
675G
Outlet Pressure Range (Select One)
Types 670 and 675
3 to 18 psig / 0.21 to 1.2 bar
5 to 30 psig / 0.34 to 2.1 bar
30 to 50 psig / 2.1 to 3.4 bar
35 to 80 psig / 2.4 to 5.5 bar except 35 to
50 psig / 2.4 to 3.4 bar with change over valve
Type 671
0 to 1 psig / 0 to 0.07 bar
0 to 5 psig / 0 to 0.34 bar
Type 674
10 to 75 psig / 0.69 to 5.2 bar
50 to 150 psig / 3.4 to 10.3 bar
100 to 225 psig / 6.9 to 15.5 bar
Pressure Gauge Ranges
(1)
(Select One)
0 to 10 psig / 0 to 0.6 kPa / 0 to 0.69 bar
0 to 30 psig / 0 to 0.2 MPa / 0 to 2.1 bar
0 to 60 psig / 0 to 0.4 MPa / 0 to 4.1 bar
0 to 160 psig / 0 to 1.1 MPa / 0 to 11.0 bar
0 to 300 psig / 0 to 2 MPa / 0 to 20.7 bar
Changeover Valve
Yes
No
1. Other ranges available upon request.