Data Sheet

Bulletin 71.2:627F
11
Ordering Guide
Body Material, Body Size, and End Connection Style
(Select One)
Ductile Iron
3/4 NPT***
1 NPT***
2 NPT***
WCC Steel
3/4 NPT***
1 NPT***
NPS 1 / DN 25, CL150 RF**
NPS 1 / DN 25, CL300 RF**
NPS 1 / DN 25, CL600 RF**
NPS 1 / DN 25, PN 16/25/40**
2 NPT***
NPS 2 / DN 50, CL150 RF**
NPS 2 / DN 50, CL300 RF**
NPS 2 / DN 50, CL600 RF**
NPS 2 / DN 50, PN 16/25/40**
Spring Case and Diaphragm Casing Material
(Select One)
Aluminum***
Ductile iron***
WCC steel***
Trim Material (Select One)
Aluminum***
Stainless steel***
Orice Size (Select One)
 3/8x1/8-inch/9.5x3.2mm**
 3/8x1/4-inch/9.5x6.4mm**
 3/8-inch/9.5mm***
1/2-inch / 13 mm***
Outlet Pressure Range (Select One)
5 to 35 psig / 0.34 to 2.4 bar, Unpainted***
35 to 100 psig / 2.4 to 6.9 bar, Red***
Pilot Supply Filter (Optional)
Type P594-1
Pilot Supply Steel Tubing (Optional)
With Type P594-1 Filter
Without Filter
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Ordering Information
Application
When ordering, specify:
1. Type of regulator
 2.Bodysize
3. Body material and trim material
 4.Oricesizeininches/mm
5. Control spring range in psig / bar
Construction
Refertothespecicationsandtoeachreferenced
table; specify the desired selection whenever there is a
choice to be made. The standard assembly position is
shown in Figure 1, but an alternate assembly position
may be factory-ordered or can be accomplished in the
eldbyunboltingthebodyorspringcaseusingthe
instructions in the appropriate section of the instruction
manual. For installation dimensions, refer to Figure 4.