Instructions / Assembly

8

1. Locate Comfort Interface on interior wall approximately 5

temperature.
2. 
Interface will cause damage to the unit.
3. Place sub-base on wall and mark mounting hole locations on
wall using base as a template.
4. Move sub-base out of the way. Drill mounting holes. Use
plastic screw anchors if needed to secure the base.
5. Fasten sub-base snugly to wall using two mounting screws.

Interface operation.
6. Comfort Interface can be attached after checking operation.
LOCATE AND MOUNT COMFORT INTERFACE

IMPORTANT
                 

Wireless Devices (see 

Sub-base
Comfort Interface
Mounting Holes
1
At Comfort Interface, press the Menu button once and
release
Enter wireless set-up menu - checking wireless components
installed.
2
Press the Connect button once and release. The Comfort
Interface will indicate  and then display 
(for Equipment Control Module) when communication has

or CTL will not appear on screen.
(see Troubleshooting)