Data Sheet

Bulletin 71.7:167D
7
Ordering Guide
Type (Select One)
167D (two-way, aluminum)***
167DS (two-way, stainless steel)***
167DA (three-way, aluminum)***
167DAS (three-way, stainless steel)***
Body Size (Ports A and C) (Select One)
1/4 NPT
1/2 NPT
Quantity (Specify)
Spring Case Style (Select One)
Drilled hole vent (Types 167D and 167DA standard)***
1/4 NPT vent
(Types 167DS and 167DAS standard)***
Single hole panel mount***
Adjusting Screw (Select One)
Square head (Types 167D and 167DA standard)***
Square head with closing cap
(Types 167DS and 167DAS standard)***
Handwheel***
Set Pressure Range (Select One)
Three-Way Switching Valve
Port A or C as Inlet
14 to 20 psig / 0,97 to 1,4 bar***
16 to 35 psig / 1,1 to 2,4 bar***
25 to 60 psig / 1,7 to 4,1 bar***
40 to 125 psig / 2,8 to 8,6 bar***
Port B as Inlet
7 to 20 psig / 0,48 to 1,4 bar***
10 to 30 psig / 0,69 to 2,1 bar***
25 to 50 psig / 1,7 to 3,4 bar***
40 to 90 psig / 2,8 to 6,2 bar***
Regulators Quick Order Guide
* * *
Readily Available for Shipment
* *
Allow Additional Time for Shipment
*
Special Order, Constructed from Non-Stocked Parts.
Consult your local Sales Ofce for Availability.
Availability of the product being ordered is determined by the component
with the longest shipping time for the requested construction.
Specication Worksheet
Application (Please designate units):
Specic Use
Line Size
Gas Type and Specic Gravity
Gas Temperature
Does the Application Require Overpressure Protection?
Yes No If yes, which is preferred:
Relief Valve Monitor Regulator
Shut-off Device
Is overpressure protection equipment selection assistance
desired?
Pressure (Please designate units):
Maximum Inlet Pressure (P
1max
)
Minimum Inlet Pressure (P
1min
)
Downstream Pressure Setting(s) (P
2
)
Maximum Flow (Q
max
)
Performance Required:
Accuracy Requirements?
Need for Extremely Fast Response?
Other Requirements:
Set Pressure Range (Select One) (continued)
Two-Way Switching Valve
Port A as Inlet
3 to 15 psig / 0,21 to 1,0 bar (Type 167D only)***
5 to 20 psig / 0,34 to 1,4 bar***
5 to 35 psig / 0,34 to 2,4 bar***
25 to 60 psig / 1,7 to 4,1 bar***
40 to 125 psig / 2,8 to 8,6 bar***
50 to 150 psig / 3,4 to 10,3 bar (Type 167DS only)***
Diaphragm, O-Rings, and Valve Plug (Select One)
Nitrile (NBR) (standard)***
Fluorocarbon (FKM)**
Spring Case Vent Location (Select One)
Position 1 - Aligned with inlet (standard)***
Position 2
Position 3
Position 4
NACE MR0175 Construction (Optional)
(1)
Yes (not available with gauge)**
NACE MR0103 Construction (Optional)
Yes (not available with gauge)**
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match
this order.
1. Product complies with the material requirements of NACE MR0175. Environmental
limits may apply.