Technical data

Configuring and Operating the System
AXP 1410 Installation and Use (6806800H70D)
99
5.3 Accessing System Components
All system components are delivered with the software installed. If you want to upgrade or
need to reinstall the software on these system components, you can use the interfaces of the
SAM1410 to access the consoles and command line interfaces of the different system
components.
The SAM1410 can be reached through telnet and through SSH.
user name: root
password: root
The shelf geographical address (SGA) is set during the system installation via a network
connection (see section Setting the Shelf Geographical Address on page 84). The default shelf
geographical address is 0.
The SAM1410 stores the shelf FRU data and the SGA persistently.
Access via the face plate interface:
Access via base interface channel 1:
SAM1410 IP Address
Left SAM1410 192.168.<SGA>.8
Right SAM1410 192.168.<SGA>.9
Active SAM1410 192.168.<SGA>.171
Standby SAM1410 192.168.<SGA>.181
SAM1410 IP Address
Left SAM1410 172.17.<SGA>.8
Right SAM1410 172.17.<SGA>.9
Active SAM1410 172.16.<SGA>.171
Standby SAM1410 172.16.<SGA>.181