Technical data

Configuring and Operating the System
AXP 1410 Installation and Use (6806800H70D)
84
5.2.3 Shelf Geographical Address
The shelf geographical address (SGA) is used to calculate the shelf manager IP addresses on the
out-of-band interface, refer Out-of-Band Interface on page 88. Therefore, changing the shelf
geographical address also changes the shelf manager IP address.
5.2.3.1 Setting the Shelf Geographical Address
Set the shelf geographical address during the system installation via a network connection.
Setting the Shelf Geographical Address
To set the shelf geographical address, proceed as follows:
1. Log in to the active shelf manager.
2. Change the shelf geographical address:
# hpishaddr -b "<new shelf geographical address>"
Where <new shelf geographical address> must be two hexadecimal
digits with no leading "0x".
-499293
-4A941012
-4B96112
-4C981213
-4D9A131
-4E9C1414
Table 5-1 Slot Numbering and Slot Addresses (continued)
Device#
Hardware
Address IPMB Address Logical Slot Number Physical Slot Number
The change of shelf address, shelf IP address and FRU activation order takes effect after a
reboot of the system.