Technical data

System Installation
AXP 1410 Installation and Use (6806800H70D)
46
3.2.2 Tools You will Need
Before you start the installation, make sure that you have all the necessary equipment at hand.
3.3 Installation
This section provides the information and instructions needed to mount a system in a rack.
Usage Equipment
General Philipps head screwdriver #1
Torque Wrenches (7, 8, 10 mm or 0.28, 0.31, 0.39 inch)
Large and small socket screwdriver
Large, medium and small Philipps screwdrivers
Nut driver with 7/16 mm socket
Multimeter
Front mounting brackets for an EIA 23’’ frame (shipped with AXP 1410)
AdvancedTCA PEM service Kit, PN 67068008A01 (shipped with AXP 1410)
Right-angle cable lug kit, PN 6706808A01 (shipped with AXP 1410)
Antistatic mat
Shelf Transport equipment: Hand truck or forklift/pallet truck
Lifting equipment for installation
PEM Power Feed Cables
System Access Crossover cable
Twisted pair Ethernet cable