Technical data

Chapter 3
AXP 1410 Installation and Use (6806800H70D)
45
System Installation
3.1 Overview
The following sections help you to start up and maintain the system:
3.2 Before Installation
This section provides the following information:
z Type label location
z Requirements
z Tools you will need
3.2.1 Requirements
The power input cables must have a minimum cross section of 21 mm
2
, AWG 4.
Step Description
Before installation This section provides information about the requirements, unpacking and
inspecting the delivery and the type label location.
Installation This section provides information about how to mount the system into a rack
and how to ground the system.
Removal This section provides information on how to power down the system and
remove it from a rack.