Technical data

AXP 1410 Installation and Use (6806800H70D)
15
About this Manual
Overview of Contents
This manual is divided into the following chapters and appendix.
z Chapter 1, System Overview, on page 23, provides a brief introduction to the AXP 1410.
z Chapter 2, Site Preparation, on page 35, provides general information such as unpacking
the system, requirements, dimensions and weight.
z Chapter 3, System Installation, on page 45 describes how to install, power up and power
down the system.
z Chapter 4, FRU Installation, on page 61 describes how to install field replaceable units, such
as boards, power entry modules or fans.
z Chapter 5, Configuring and Operating the System, on page 79 gives information on network
management, software, accessing system components, and power and cooling
subsystems.
z Chapter 6, Supported IPMI Commands, on page 119 lists standard, PICMG, and Emerson-
specific IPMI commands.
z Chapter 7, FRU Information and Sensor Data Records, on page 123 lists FRU information and
SDRs of PEMs and FTMs.
z Chapter 8, Shelf Management Alarm Module, on page 171 describes the shelf management
alarm module.
z Appendix A, Related Documentation, on page 191 lists relevant documentation and
specifications.
z Safety Notes on page 193 lists all safety notes relevant for this system.
z Sicherheitshinweise on page 205 is a German translation of the safety notes chapter.