Data Sheet

Bulletin 71.1:133
23
Ordering Information
UsetheSpecicationssectiononpage2andcarefully
reviewthedescriptiontotherightofeachspecication.
Use this information to complete the Ordering Guide
Type 133HP
2 to 5 psig / 0.14 to 0.34 bar, Yellow
4.5 to 10 psig / 0.31 to 0.69 bar, Orange
6 to 20 psig / 0.41 to 1.4 bar, Silver
16 to 30 psig / 1.1 to 2.1 bar, Red
26 to 40 psig / 1.8 to 2.8 bar, Blue
36 to 50 psig / 2.5 to 3.4 bar, Green
45 to 60 psig / 3.1 to 4.1 bar, White
Trim, Percent of Full Capacity (Select One)
100 percent (standard)
60 percent
40 percent
25 percent
Elastomers (Select One)
Nitrile (NBR) (standard)
Fluorocarbon (FKM)
(Available for Types 133L and 133H only)
Body Position (refer to Figure 8) (Select One)
Position 1 (standard)
Position 2
Position 3
Position 4
Vent Position (refer to Figure 8) (Select One)
Position C (standard for Type 133HP)
Position D
Position E (standard for Types 133L, 133H,
and 133Z)
Position F
Ordering Guide
Type (Select One)
133L
133H
133Z
133HP
Body Material and End Connection Style (Select One)
Cast Iron
NPT
CL125 FF
Steel
NPT
CL150 RF
Outlet Pressure Range (Select One)
Type 133L or 133H
2 to 4 inches w.c. / 5 to 10 mbar, Brown
3.5 to 6 inches w.c. / 9 to 15 mbar, Red
5 to 9 inches w.c. / 12 to 22 mbar, Black
8.5 to 18 inches w.c. / 21 to 45 mbar, White
14 to 28 inches w.c. / 35 to 70 mbar, Green
0.75 to 2 psig / 52 mbar to 0.14 bar, Blue
Type 133H
1.5 to 3 psig / 0.10 to 0.21 bar, Orange
2 to 5 psig / 0.14 to 0.34 bar, Yellow
5 to 10 psig / 0.34 to 0.69 bar, Blue
Type 133Z
-1 to 1 inch w.c. / -2 to 2 mbar, Unpainted
0 to 4 inch w.c. / 0 to 10 mbar, Brown
on the following page. Specify the desired selection
wherever there is a choice to be made. Then send the
OrderingGuidetoyourlocalSalesOfce.