Instruction Manual

Types 1301F and 1301G
7
Parts Ordering
When corresponding with your local Sales Ofce about
this regulator, include the type number and all other
pertinent information stamped on the bottom cap and
on the nameplate. Specify the complete 11-character
part number from the following parts list when ordering
replacement parts.
Parts List
Note
Parts marked NACE in this parts list
are intended for corrosion-resistant
service as detailed in the NACE
International Standards MR0175/
ISO 15156 and/or MR0103.
Key Description Part Number
Parts Kits (Includes keys 5, 6, 7, 12, 13, and 14)
Stainless steel kits include Fluorocarbon (FKM)
gaskets. Brass kits include Neoprene (CR) gaskets.
Brass
With Nylon (PA) Disk R1301FX0012
Stainless steel
With Nylon (PA) Disk R1301FX0022
Brass
With PTFE Disk R1301FX0032
Stainless steel
With PTFE Disk R1301FX0042
1 Body
1/4 NPT Connection
Brass (2 outlet port) 39A1342X012
Brass (3 outlet port) ERAA00584A0
CF8M Stainless steel (2 outlet port) 32B4291X022
CF8M Stainless steel (3 outlet port) ERAA00603A0
1/4 x 1/2-inch Flanged Connection
CF8M Stainless steel
CL300 RF 14B1420X012
CL600 RF 14B2059X012
CL1500 RF 14B3375X012
PN 25 14B3377X012
1/4 x 1-inch Flanged Connection
CF8M Stainless steel
CL300 RF 14B3376X012
CL600 RF 14B1386X012
CL1500 RF 14B3370X012
PN 25 14B3377X022
Body (Cold Temperature)
1/4 NPT Connection
CF8M Stainless steel (2 outlet port) 34B0527X012
CF8M Stainless steel (3 outlet port) ERAA00604A0
NPS 1/4, NPT Connection
2 Spring Case
Type 1301F
Brass
Standard or with T-Handle 1D383113012
CF8M Stainless steel
With 1/4 NPT vent connection 22B0753X012
Key Description Part Number
2 Spring Case (continued)
Type 1301G
1/8 NPT vent connection
Standard or with T-Handle
Brass 2P195713022
316 Stainless steel 21A6377X012
3 Bottom Cap
Brass 1D468513012
304 Stainless steel 1J919635072
316 Stainless steel (NACE) 1J9196X0032
4 Yoke
Brass 1D383313012
316 Stainless steel (NACE) 1J925936042
5* Orice
303 Stainless steel 1D386535032
316 Stainless steel (NACE) 1D3865X0032
6* Valve Disk Assembly
Brass/Nylon (PA) 1D4684000A2
Brass/PTFE 1D4684X0012
303 Stainless steel/Nylon (PA) 1D4684000C2
303 Stainless steel/PTFE 1D4684000B2
306 Stainless steel/PTFE (NACE) 1D4684X0082
7* Diaphragm (2 required)
302 Stainless steel 1D387036012
K500 Monel
®
(NACE) 1D3870X0012
8 Diaphragm Plate, Zinc-plated steel
Type 1301F 1D387325072
Type 1301G 1K155725072
9 Upper Spring Seat, Steel
Type 1301F 1B798525062
Type 1301G 1K155828982
10 Valve Spring
302 Stainless steel 1D387137022
Inconel
®
X750 (NACE) 15A3522X012
11 Spring, Zinc-plated steel
Type 1301F
0 to 75 psig / 0 to 5.2 bar, Blue 1D387227022
0 to 150 psig / 0 to 10.3 bar, Silver 1B788527022
0 to 225 psig / 0 to 15.5 bar, Red 1D465127142
Type 1301G
200 to 500 psig / 13.8 to 34.5 bar, Silver 1K156027142
12* Body Gasket
Neoprene (CR) 1D372903012
Fluorocarbon (FKM) 1D372904122
13* Diaphragm Plate Gasket
Neoprene (CR) 1D373003012
Fluorocarbon (FKM) 1D373004122
14* Bottom Cap O-ring
Fluorocarbon (FKM) 1J926806382
EPDM 1J9268X0022
Nitrile (NBR) -65F 1J9268X0012
Fluorosilicone (FVQM) -80F ERAA03306A0
15 Adjusting Screw
Type 1301F
Steel (standard) 1E639928992
Handwheel, 416 Stainless steel 1N411435132
T-handle, Steel 1F2236000A2
Type 1301G
Zinc-plated steel (standard) 1K140624092
T-handle, Steel 19A8060X012
16 Spring Case Cap Screw (6 required)
Zinc-plated steel 1E8220X0012
Stainless steel 1E8220X0212
Stainless steel
(For Type 1301G Cold Temperature) 1E8220X0022
*Recommended spare part.
Monel
®
and Inconel
®
are trademarks of Special Metals Corporation.