User's Manual

7-2 REPORTS
MON2000
View Report from Live Data JULY 2010
3. Select the report type, stream, and update
setting from the lists provided.
4. Click the button or press the F2
key to generate and display the selected
report.
To close this dialog without generating a
report, click the button to return
to the main window.
Table 7-1 Description of Report Display Settings
Setting Description
Reports list of pre-defined reports; Shows report
type (Analysis, Raw Data, Calibration,
etc...)
Select Stream list of available streams
For a single detector GC:
0–Current = last stream analyzed
For a dual detector GC:
0–Current Det1 = last stream analyzed,
Detector 1
0–Current Det2 = last stream analyzed,
Detector 2
Update Method list of update options that determine
when the report display is refreshed
Anly = after each analysis
Cal = after each calibration
Fcal = after each final calibration
None = not updated
The contents of the GC analysis
reports are defined by:
• the GC application
• functions such as
Calculations, User Defined,
Limit Alarms, and Streams