User's Manual

3-12 GETTING STARTED
MON2000
Procedures Guide JULY 2010
communications baud rate, at PC 2.11.3 File > (COM ID)
component code and name 5.2 Application > Component Data [F6]
component full scale (for output) 5.1
5.10
Application > System
(CGM Analog Output Config and Baseline
Offset)
Application > Analog Outputs
component(s) programmed for input 5.9
5.11
Application > Analog Inputs
Application > Discrete Inputs
component(s) programmed for output 5.6
5.7
5.10
5.12
Application > Limit Alarms
Application > Discrete Alarms
Application > Analog Outputs
Application > Discrete Outputs
component, retention time 5.2 Application > Component Data [F6]
component zero (for output) 5.10 Application > Analog Outputs
Compressibility (on/off) 5.5.1 Application > Calculations > Control
current date 4.7 Control > GC Time
current time 4.7 Control > GC Time
cycle time 5.3 Application > Timed Events [F5]
delete alarms 5.6
8.3
Application > Limit Alarms
Log > Alarm Log
delete component from component list 5.2 Application > Component Data
[F6], [DELETE]
delete inhibit, integration, peak width 5.3 Application > Timed Events [F5]
delete output(s) 5.6
5.7
5.10
5.12
Application > Limit Alarms
Application > Discrete Alarms
Application > Analog Outputs
Application > Discrete Outputs
edit numeric value 5.4.1 Application > User Defined > Numeric
edit select values 5.4.2 Application > User Defined > Selection
edit text strings 5.4.3 Application > User Defined > Text Strings
Table 3-3 Menu and Manual Section per MON2000 Procedure (Continued)
Task or Data Item Section(s) Menu [Keystroke]