Satellite Radio User Manual

126 Micro Motion
®
Model 2400S Transmitters for DeviceNet
™
Troubleshooting
Figure 11-2 Exploded view of transmitter and connection to sensor
5. If the problem is not resolved, unplug the cable from the feedthrough by removing the snap
clip (see Figure 11-2), then pulling the connector away from the feedthrough. Set the
transmitter aside.
Feedthrough
(mounted on sensor)
Transmitter
User interface module
Sensor cable for
feedthrough connection
Transmitter housing cover
Transmitter
housing
Clamp
Feedthrough pins
(inside housing)
Snap clip