User's Manual

11
SECTION 5 – SETUP MENU CONFIGURATION
5.1 Menus Database Configuration
All ECO-A-X configuration variables are stored in its menu database. Many menu items will
contain default values from the factory and require changes to better match a user’s particular
application. ECO-A-X menus may be configured from the magnetic keypad in 5-10 minutes per
transmitter.
The ECO-A-X configuration menus are shown in Figure 5-1.
5.2 Configuration Using the Magnet:
Passing the magnet over the EDIT key, from either data display, displays SETUP PAGE 1 as
shown in Figure 5-2. The UP / DOWN keys maneuver the pointer while EDIT enters sub levels of
menu items. All SETUP menu items have at least one page of sub-menus. Items with sub-
menus are indicated by the > symbol (right hand pointing arrow) at the end of each line. To edit
menu items use UP / DOWN keys to point to them, then activate the EDIT key to enter these