User Manual

Daniel 3814 Liquid Ultrasonic Meter Installation Manual Section 4: Configuration
3-9000-760 Rev E March 2015
Security seals for the meter (optional) 85
4.5 Security seals for the meter (optional)
For the integrity of the meter metrology and to prevent tampering with the transmitter
electronics and transducer assemblies, attach security latches on the end caps and install
security wires on the Transmitter Electronics Enclosure end caps, the Base Enclosure hex head
bolts. See Section 3.6.8 and Section 3.6.9.
Seal the conduit ports with sealing compound according to the customer’s requirements (e.g.,
after approximately one to two weeks of run time). Also, see Section 3.4.1 and see
Section 3.4.2.