User Manual

Daniel 3814 Liquid Ultrasonic Meter Installation Manual Section 4: Configuration
3-9000-760 Rev E March 2015
Using AMS Device Manager to configure the meter 79
c. Click the Service Tools|Variables tab. The Variables page displays tabs for the
device’s Flow Data, Path Information, Flow Totals, and All Variables).
Figure 4-16 AMS Device Manager - Service Tools
d. The
Service Tools|Flow Data page includes charts for flow and sound velocities.
The flow values (flow direction, average flow velocity and average sound
velocity) parameters are displayed for the connected device.
e. Click
Service Tools|Variables|Path Information tab to view the device’s chord
performance (%), Gain (dB), SNR (dB), Signal (mV) and Noise (mV).
f. Click
Service Tools|Variables|Flow Totals to view the volume totals (Forward and
reverse Uncorrected Volume) parameters for the connected device.