User Manual

Daniel 3814 Liquid Ultrasonic Meter Installation Manual Section 3: Electrical installation
3-9000-760 Rev E March 2015
Securing the meter 57
2. Install the security seal wire into and through one of the two holes in the end cap.
Choose holes that minimize counterclockwise rotation of the end cap when the
security wire is taut (maximum wire diameter.078 inch; 2.0mm).
Figure 3-9 Transmitter Electronics Enclosure security seals
3. Adjust the security wire, removing all slack and thread into the lead seal.
4. Cut wire ends to remove excess wire.
A.
A. Transmitter Electronics Enclosure end cap
B. Security wire seals
B.