User Manual

Daniel 3814 Liquid Ultrasonic Meter Installation Manual Section 2: Mechanical installation
3-9000-760 Rev E March 2015
Use of appropriate safety engineered swivel hoist rings in meter end flanges 35
What size safety engineered swivel hoist ring do you need?
To determine the size of the hoist rings required for your meter, use the appropriate table below
for Liquid Ultrasonic Meters (see Table 2-2). Look down the column that matches the ANSI
rating of your meter. Find the row that contains your meter size. Follow the row to the end to
find the appropriate hoist ring part number.
Table 2-3 Hoist ring lookup table for Daniel 3814 Liquid Ultrasonic Flow Meters
ANSI 300 ANSI 600 ANSI 900 ANSI 1500
Daniel Part
Number
4” to 10” 4” to 8” 4” to 8” 4” to 6” 1-504-90-091
12” to 18” 10” to 16” 10” to 12” 8” to 10” 1-504-90-092
20” to 24” 18” to 20” 16” to 20” 12” 1-504-90-093
30” to 36” 24” to 30” 24” 16” to 20” 1-504-90-094
36” 30” to 36” 24” to 36” 1-504-90-095
Note: 4” to 6” 45 degree meters and 8” to 36” 60 degree meters