User Manual

Daniel 3814 Liquid Ultrasonic Meter Installation Manual Section 2: Mechanical installation
3-9000-760 Rev E March 2015
Meter components 21
2.2 Meter components
Daniel 3810 Series Ultrasonic Flow Meters are assembled, configured, and tested at the factory.
The meter components include the Transmitter Electronics Enclosure, the Base Electronics.
Enclosure and the Meter Body with transducer assemblies.
FLUID CONTENTS MAY BE UNDER PRESSURE
When the meter is under pressure, DO NOT attempt to remove or adjust the transducer housing.
Attempting to do so may release pressurized fluid, resulting in serious injury or equipment damage
FLUID CONTENTS MAY BE HAZARDOUS
The meter must be fully depressurized and drained before attempting to remove the transducer housing.
If fluid begins to leak from the transducer housing, immediately reinstall it.
Failure to do so may cause serious injury or equipment damage.
A. Transducer housing
A.