User Manual

Daniel 3814 Liquid Ultrasonic Meter Installation Manual Section 1: Introduction
3-9000-760 Rev E March 2015
Meter specifications 11
Body and Flange Pressure
rating range
U.S. Customary Units - Meter sizes 4 inches to 24 inches (Raised face, RTJ or Companion)
• Line sizes:
– 4” inches (DN 100)
– 6” inches (DN 150)
– 8” inches (DN 200)
– 10” inches (DN 250)
– 12” inches (DN 300)
– 16” inches (DN 400)
– 18” inches (DN 450)
– 20” inches (DN 500)
– 24” inches (DN 600)
• ANSI pressure classes (per ANSI B16.5):
– 150 ANSI / PN 20
– 300 ANSI / PN 50
– 600 ANSI / PN 100
– 900 ANSI / PN 150
– 1500 ANSI/PN 200
• Body and flange material and temperature ratings:
– Carbon Steel body and Flanges: (-45 °C to 150 °C)
– 316 Stainless steel body and flanges: (-50 °C to 150 °C)
– 316L Stainless steel body and flanges: (-50 °C to 150 °C)
– Carbon Steel body and flanges: (-50 °C to 150 °C)
• Maximum Pressures
– Dependent on operating temperature
• Minimum Pressures
– 0 psig 0 barg
Meter bore
– Schedule 20, 30, 40, 80, 120, 160, LW, XS, XXS and Standard
Flange types
• Raised face or RTJ
Specific Gravity
• 0.35 to 1.50
Accuracy Limits
• Accuracy limits typically are:
– ±0.20% without a flow calibration
Table 1-2 Meter specifications