Install Instructions

11. Lightly coat the new cover
gasket with refrigeration oil on
both surfaces and carefully
place in the groove of
the cover.
12. Push the cover against the shell as-
sembly. Make certain the compression
spring is against the inlet retainer, and
is not hanging-up on the handle.
13. Install two cover bolts in diagonally
opposite holes to hold the cover snugly
against the shell edge. Use slotted bolt
hole for easier installation.
14. Install the remaining cover bolts
snugly.
15. Torque all cover bolts evenly in a crisscross pattern to a
torque of:
25 ft. lbs. maximum for STAS units
and
30 ft. lbs. maximum for ADKS units.
STAS units with the S-V option for suction line service have
stainless steel cover bolts, the maximum torque for these
bolts is 20 ft. lbs.
16. Test for leakage.
No
Gas Leaks
FILTER-DRIER DIMENSIONS SHIP
SIZE A B C WT. LBS.
42 6 1.58 3.12 1
48 5.5 1.77 3.72 1 1/2
100 6.5 2.06 4.81 4
BLOCKS & FILTER CORES SPECIFICATIONS
CATALOG DIMENSIONS SHIP
NUMBER A B C WT. LBS.
F-48F-48R 5 1/2 2 13/16 3 7/8 3/4
F-100 6 1/2 3 3/4 4 13/16 1 1/2
STAS & ADKS INTERNALS
SHELL STRAINER
ASSEMBLY
FILTER-DRIER
BLOCK
FILTER-DRIER
BLOCK GASKET
INLET BLOCK
RETAINER
ADKS INTERNALS
FILTER-DRIER
BLOCK
STAS INTERNALS
ADKS INTERNALS
17.Replacethesuctionlinelter-drierblockwithsuction
 lineltertominimizesuctionlinepressuredrop,butstill
providing compressor protection.
FELT OR GASKET
FELT OR GASKET
FELT OR GASKET
FELT OR GASKET