User's Manual

Page 88
J-400 Series
18.11 J1000™ Wireless Remote
A. The J1000™ Remote
Your spa is equipped with a technologically
advance wireless remote (Figure A). Most spa
functions can be controlled with the remote. The
sleek modern design and easy navigation make
this remote a great addition to your spa enjoy-
ment. Listed below are the remote features, how
to access and control them. General feature of
the remote are:
When not in used or after any 15 •
seconds of inactivity the remote goes
into a “Sleep” status until activated. The
backlighting and display will turn off.
When activated the remote checks and •
veries that it and the control system are
bonded.
When activated the remote checks •
to see if any of the components are
running. If so, the component icon will blink on the
remote LCD display to alert you that those components
are activated. The water temperature is displayed on top of the
screen, while the main menu is displayed.
Pressing any key will activate the remote; the backlight will turn •
on and illuminate the keys and display. This lighting has a 10
second time-out period if no keys are pressed.
Note: Remote unit is water resistant not waterproof, therefore the unit
should never be left in the spa while the cover is on and spa is not in use.
= Lock icon: Will only appear if the spa is in locked mode and
needs to be unlocked via the spa not the remote.
= Temperature icon: Allows you to set and control the
temperature.
= Time icon: Allows you to set and control the time, either in a
12-hour or 24-hour period.
1
= Lights 1 icon: Allows you to control the interior lights.
1
= Show 1 icon: Allows you to control the interior Light Rotation
mode.
2
= Lights 2 icon: Allows you to control the exterior lights.
1
1
USB
AUX
1
2
iPod
22
Figure A