User's Manual

Page 90
J-400 Series
1. Bonding the remote and spa
When you rst use the remote, it will bond to the spa for operational use
(page 73).
2. Main Menu
When any key is pressed and the remote awakes it will display the icons
that are selectable. You can use the Navigational Quad Keypad (up,
down, left or right) to navigate through the screens and make selections.
By moving through the icons, they will blink to let you know that if you hit
the Select button you will activate that component or aspects of it.
3. Adjusting the Temperature
When the temperature icon is selected, all other icons on the display
screen will disappear. The only two items shown are the thermometer
icon and the digit temperature in ºC or ºF. Using the Navigational Keypad
you can:
Note: When you rst enter the screen the temperature display will be
blinking. You can stop this by pressing any key.
Increase the temperature by pressing the Up button.
Decrease the temperature by pressing the Down button.
Use ºC reading by pressing the Left button.
Use ºF reading by pressing the Right button.
Go to the Main Menu by pressing the Return button or not
pressing any keys for 4 seconds.
4. Activating the Jets
When the Jets pump icon is selected, all other icons on the display
screen will disappear. The only two items shown are the jets pump
icon and the digit temperature in ºC or ºF. Using the Navigational Quad
Keypad you can:
Turn on the Jets pump by pressing the Select button.
Turn off the Jets pump by pressing the Select button .
1
2
1
USB
AUX
1
2
2
iPod
1
2
1
1
2
2
Remote display for spas
with the stereo option
Remote display for spas
without the stereo option