User's Manual

Page 54
J-400 Series
11.3 Setting the Check Filter
Reminder
1. Use the Navigational Quad Keypad
to scroll from Language to Filter by
using the Down button. After “Filter”
selection is active, press the Splash
button to access the “set lter time”
(Figure C).
2. Press the Left or Right button on the
Quad Keypad to scroll the number
of days you would like to the
reminder to appear so the lters and
polishing bag can be cleaned or
replaced.
3. Press the Splash button to conrm
and save your selection.
4. When the time period set expires, the “Please check lter!” (page 72)
will appear on the Main Menu display. The reminder must be reset
when the time allotted expires.
Note: The time range is from 10 to 365 days in increments of 10 days or
you can elect to turn the feature “OFF”.
11.4 Setting the Date
1. Press button C (Figure A) to enter the
date and time menu.
2. The “Date Setting” is already
highlighted once you enter the
screen (Figure E). Press the Splash
button on the Navigational Quad Keypad to go to the
submenus.
3. The screen will open with the “Set
Year” highlighted (Figure F). Press
the Left or Right button on the Quad
keypad to scroll through selection.
Once the correct year is displayed,
press the Down button on the
Quad keypad to enable the month
selection.
Figure C
Figure C
Press to
set filter timer
Language
Ozone
Filter
100 Days
ENG
5
4
3
SETTINGS 1
Figure D
Press to
save filter timer
Language
Ozone
Filter
100 Days
ENG
5
4
3
SETTINGS 1
Press to Enter
5 4 3
DATE & TIME
Select
Date Settings
Time Settings
Date Settings
Dec 22 2008
04:15PM
Figure E
5
4
3
TIME
Select
Ye a r
Month
Day
Press to Save
Set Year 2008
Figure F