User's Manual

Page 53

J-400 Series

11.0 Programming Instructions for Setting 1 Menus

Your Jacuzzi spa is equipped with two setting menus that allow you to

program and activate different components of the spa. In the “Settings

1” menu you can program the Language, Date and Time, and the check/

clean lter reminder. You can also enter the “Settings 2” menu (Section

12.0, page 57).

11.1 To access the Setting 1 Menu:

1. Press button D from the Main Menu (page 32) to enter the Settings 1

Menu (Figure A).

2. From this menu you can choose a language (either English

or Français), set the time and date, set the change/clean lter

remainder and see the on or off status for the ozone (if equipped, the

ozone is not programmable).

11.2 Choosing the Language

1. Press button A to enter the

Language submenu. The screen will

change to the Figure B.

Note: English is the default language.

2. Use the Navigational Quad Keypad

to switch between English and

Français by pressing the Up or Down button.

3. Press the Splash button to save your change. The screen will return

to the Settings 1 Main Menu.

Press to

set filter timer

Language

Ozone

Filter

OFF

ENG

5 4 3

SETTINGS 1

Figure A

Figure B

5 4 3

LANGUAGE

Select

English

ENG

Français

FRA

English

ENG

FRA

Press to Save