User's Manual

Page 51
J-400 Series
B. To access the Exterior Light
Rotation Mode
The lighting performance can be user
enhanced by controlling the intensity
and frequency effects as follows: You
can control the intensity and
frequency of the lighting effects.
1. Press button C to enter the Light Rotation Mode (Figure I).
2. To control the speed of the light rotation use the Navigational Quad
Keypad as follows:
Press the Left button to decrease the speed of the light rotation •
from 3, 5, 10, 18, 33 or 60 seconds
Press the Right button to increase the speed of the light rotation •
from 3, 5, 10, 18, 33 or 60 seconds.
3. To increase or decrease light intensity, use the Navigational Quad
Keypad as follows:
Press the Up button to increase intensity in 25% increments.•
Press the Down button to decrease intensity in 25% increments.•
As the intensity is increased the bulb will darken to reect the effect
(Figure H, page 50).
Note: The intensity range is from 25% to 100%, in increments of 25%.
Intensity defaults to the last setting used.
4. Press button A to go to the interior lights menu.
5. Press button B to deactivate light rotation mode and select a solid
color (the last color and intensity used).
6. Press button C to turn off the exterior lights.
7. Press button D to return to Main Menu.
10.5 Adjusting Individual Jet Flow
The water ow to certain jets in your spa can be increased or
decreased by rotating the outside jet face.
Note: Always keep at least 6 adjustable jets open at all times.
10.6 Adjusting PowerPro™ MX2 Jets
Tilt PowerPro MX2 Jet nozzle to angle of choice as desired.
Rotate nozzle clockwise to reduce ow volume from jet or
rotate counterclockwise to increase ow volume.
Note: Always keep at least 6 adjustable jets open at all
times.
LIGHT ROTATION
SPEED
Brightness
Figure I