User's Manual
Page 48
J-400 Series
A. To access the Interior Solid Color Mode:
1. Press button A to activate the solid color mode.
2. Press again to turn off.
Note: The default color and intensity will always be the last color and
intensity used.
3. Press either the Left or Right button of the Navigational Quad Keypad
to scroll through or select one of the 7 different colors (Figure C).
Press the Left button to move forward in the color sequence. •
(Blue-Cyan-Green-Yellow-Orange-Red-Purple-Blue)
Press the Right button to move backwards in the color sequence. •
(Blue-Purple-Red-Orange-Yellow-Green-Cyan-Blue)
4. The intensity of the lights can be
controlled in both the solid color or light
rotation modes by using the
Navigational Quad Keypad (Figure D).
Press the Up button to increase the •
intensity in 25% increments.
Pres• s the Down button to decrease the intensity in 25%
increments.
As the intensity is increased the bulb will darken to reect the effect.
Note: Intensity defaults to the last setting used.
Blue Cyan
Green
Yellow
Orange
RedPurple
Figure C
25% 50% 75% 100%
Figure D