Owner`s manual

Other Controls and Fixtures
Air Control Valves
Light
Air Injectors
(Not available on Lite
Leader & SS-1D controls)
Strip Skimmer
(Emerald Base &
Emerald Classic)
Weir Skimmer
(Emerald Special Edition,
Elite & Cygnus Series)
Suction Grate
Warning:
Never Block or remove
the suction grate. Do not
use spa if suction grate is
removed!
The air intake valves are located near the spa side control panel.
Turn to increase or decrease the amount of air mixed with the water
flow. More air adds to the massage effect.
When the blower is on, air bubbles are released from the injectors
primarily located on the lounger seat and the footwell. These
injectors create a mild vibrating effect that massages the body.
This skimmer is found on Emerald Base and Classic models
featuring Lite Leader, SS-1D and SS-3D controllers. Its purpose is
to skim the water surface. Always keep the water level at least
2/3 high on the skimmer or damage to the system may result.
This skimmer is found on Emerald Elite (DS-2 controller), Special
Edition (SS-3D controller) and Cygnus Series (DS-4 controllers).
Its purpose is to skim the water surface. Always keep the water
level at least half way up the opening of the skimmer or damage
to the system may result.
The suction grate is the intake opening for the water circulating
system. This grate protects you from the powerful suction
created by the pump(s) that power your spa.
OFF
ON
Aromatherapy Option
(NOT an option
on the Emerald Base)
To use the aromatherapy feature, unscrew the cap and, as the
picture to the right demonstrates, place special aromatherapy
pellets inside. The scent will be disbursed primarily while the
blower is operating.
36
Emerald Whirlpool Spa Owner's Manual
This fixture is controlled by the "Light" button on the SS-3D, DS-2
and DS-4 panels. With the Lite Leader and SS-1D, see the Lights
and Jets section on page 18 for the Lite Leader control and page 20
for the SS-1D. (Optional Fiber Optics pictured to the right).