Product specifications

SecurStor 16i Installation and Hardware Reference Manual
3-6
LAN Activity Green
ON for linked.
BLINKING indicates active transmission.
Table 3-4: GbE LAN Port LED Definitions
Figure 3-14: 10/100BaseT Management Port Indicators
Name Color
Status
Link Status Green
ON indicates currently connected to a
LAN.
LAN Activity Green
BLINKING indicates active transmission.
Table 3-5: 10/100BaseT Management Port LED Definitions
3.2.5 BBU Module LED
The BBU module has an LED on its faceplate. (See Figure 3-15) The function is the
same as the similar LED on the controller module. The LED is off when the BBU is
functioning normally and is able to sustain the cache memory. The LED flashes to
indicate the BBU is charging. If the LED is illuminating amber, the BBU may have
lost its ability to hold electrical charge. You should then contact your vendor to
verify the problem.
Figure 3-15: BBU Module LED
3.2.6 PSU LEDs
Each PSU comes with a single LED at the back (see Figure 3-16), located close to
the power switch that turns on the subsystem. This LED indicates the operational
status of the PSU module. Please refer to the PSU LED definitions shown in
Table 3-
6.
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering