Product specifications

SecurStor 16i Installation and Hardware Reference Manual
1-2
(BBU) is now equipped with an EEPROM that helps record the installation date and
notify system administrators if the battery’s life expectancy is reached. The BBU is
hot swappable and is accessed through the controller’s faceplate.
Four (4) RJ-45 connectors connect the subsystem to network switches or Ethernet
ports of independent devices. Dual-redundant, hot-swappable cooling modules and
power supplies protect the subsystem from overheating and the down time by power
outage. The modular nature of the subsystem and the easy accessibility to all major
components ensure the ease of the subsystem maintenance.
NOTE:
On receiving and unpacking your subsystem, please check the
package contents against the included Unpacking Checklist. If
any modules are missing, please contact your vendor
immediately.
1.1.2 Enclosure Chassis
1.1.2.1 Chassis Overview
The SecurStor 16I RAID storage is housed in a 3U metal chassis that is
divided into front and rear sections. Key components are respectively
accessed through the front (see
Figure 1-3) and rear (see Figure 1-4) panels.
The enclosure chassis can be mounted into a standard 19-inch rack or
enclosure cabinet using support brackets that are separately-purchased.
NOTE:
Components accessed through the front panel are referred to as “Front
Panel Components” and components accessed through the rear panel are
referred to as “Rear Panel Components.”