User manual

Locating Beeper Operating Instructions Version 1.0
Page 7 of 20
3. Functionality
There are several options for activating the alarm:
• A defined servo position, e.g. by a switching channel of the
transmitter (servo position < -100%)
• The defined servo position of a servo which is connected in
parallel to the Locating Beeper (e.g. choke servo or tow
release)
• Failsafe setting of the servo position (e.g. turning the
transmitter off)
• Missing or erroneous servo signal (e.g. turning the transmitter
off)
• Suddenly missing external supply (PRO-version only)
The receiver does not deliver a servo signal (PPM modulation) if the
pilot turns the transmitter off. This is recognized by the Locating
Beeper which then will signal alarm.