User manual

Locating Beeper Operating Instructions Version 1.0
Page 10 of 20
4. Specifics of PRO-Version
The PRO-version of the Locating Beeper behaves just like the normal
version as far as the low voltage alarm is concerned. Model finder
alarm (S.O.S. alarm signal) which results from an erroneous servo
signal is still output by the PRO-version if the receiver supply is
interrupted or missing.
The S.O.S alarm signal is repeated every 4 seconds. An exception is
the autarky operation, i.e. if the external receiver supply is interrupted.
Now the distance of the signals is up to 10 seconds depending on the
charge state of the integrated battery.