User manual

DPSI RV Family Operating Instructions Version 2.1
page 8 of 44
Hint:
On delivery, the DPSI RV system’s low voltage recognition is programmed for 2-
cell LiPo batteries. For using other battery types, the corresponding type must be
programmed first (see chapter 6.9)!
The output voltage is set to 6.0 volts on delivery (DPSI 2001 RV 5.9 volts – other
values on customer request possible).
Different versions:
The DPSI 2001 RV is the enhancement of the DPSI 2001 and supplies
26 servos altogether, which result from 10 receiver channels.
Therefore, it is predestinated for all kinds of large model airplanes. Two
additional outputs (MPX connectors) allow for connection of consumer
loads, which can be supplied with unregulated battery voltage (e.g. 7.4
volts high load servos, smoke pumps, illumination etc.).
Connection Schema DPSI 2001 RV: